Samsung’s QLC Drive, 860 QVO: Too Expensive at Launch

One of the somewhat confusing aspects of the SSD market is that ‘newer’ technology does not necessarily equal ‘better’. This is most pronounced in the move towards additional bits per cell in memory chips.

It should be mentioned that in spite of my own earlier, though at the time reasonably well-founded scepticism, triple-level cell NAND actually turned out alright. With drives such as the EVO series, Samsung and other manufacturers have proven that TLC NAND is clearly a viable option in consumer products.

Additional bits affect durability

QLC NAND

Image credit: Micron

And now Samsung once again moves on to the next level of affordability (in theory) per storage unit with QLC NAND. That is, quad-level cell memory chips that, as the name implies, store yet another bit per cell compared to TLC (three bits), MLC (two bits) and the most durable SLC (just one).

This also brings to light that the naming conventions don’t make sense. MLC is short for multi-level cell, and so really includes all variants other than SLC. If QLC is Quadruple, the next level will be Quintuple (also QLC). Why not call it e.g. 2LC, 3LC, 4LC, 5LC? But I digress.

The great thing about these additional levels is that they store another bit, making the manufacturing more efficient and the cost per GB lower. The problem is that both performance and endurance are affected, all other things equal. TLC will wear out faster than MLC, which will wear out faster than SLC.

Samsung and others have come up with some clever solutions to these problems in the past, using spare capacity, or over-provisioning, and smart wear levelling algorithms (among other things), but there are always compromises.

As a result, you will probably never notice that your drive wears down until you’ve thrown the whole computer away for other reasons. Servers and other devices with a continuous workload are another matter, but will usually not come in contact with the cheapest SSDs.

A new level of affordability, in theory

Image credit: Samsung

This brings us to the latest and greatest in terms of manufacturing efficiency, the new Samsung 860 QVO. With its new QLC-based drive, it’s immediately clear that Samsung’s focus here is on the always important $/GB formula – a unique selling point in itself. Thus, the company launches only high-capacity drives ranging from 1TB up to 4GB in the series.

Nevertheless, the specs of the 860 QVO are quite impressive. On paper, it looks like the QVO series might perform on par with more expensive drives, while at the same time offering decent endurance. Sequential read/write performance is ‘up to’ 550/520 MB/s and the endurance rating is 360 TBW for the 1 TB drive, which is more than half of the EVO (600 TBW).

As always, SSD performance is much more than the theoretical sequential throughput, which is confirmed by Anandtech. This could have been fine if the prices had been competitive, which they unfortunately are not so far.

As it stands, the MSRP on the 1 TB 860 QVO is $149, which is about what you’ll pay for a 1 TB 860 EVO right now – a drive with twice the endurance and better overall performance. It’s highly likely that prices on the QVO series will come down eventually. At this time, however, there is no reason whatsoever to pay even slightly less for a QVO drive as you would for an EVO – it needs to be considerably less expensive to offer good value.

Tags: